# \[Pro\] Corners

**URL:** <https://discourse.softpress.com/t/pro-corners/15711>\
**Category:** Freeway\
**Created:** [November 24, 2012, 5:44pm UTC](https://discourse.softpress.com/t/pro-corners/15711 "2012-11-24T17:44:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Steve\_Ainsworth](https://discourse.softpress.com/letter_avatar_proxy/v4/letter/s/3be4f8/32.png) [@Steve\_Ainsworth](https://discourse.softpress.com/u/Steve_Ainsworth)\
**Post date:** [November 24, 2012, 5:44pm UTC](https://discourse.softpress.com/t/pro-corners/15711/1 "2012-11-24T17:44:07Z")

</div>

Hi All,

Probably a very simple question and sorry for not trying hard enough… but

- I have a box and only want the top left and right to have bendy corners - how?

I know how to make the whole box have bendy corners, but not just certain edges.  
(via - inspector - Graphic item - shape - corner 0-9px)

Many thanks  
Steve

* * *

freewaytalk mailing list  
email@hidden  
Update your subscriptions at:  
[http://freewaytalk.net/person/options](http://freewaytalk.net/person/options)

---

<div class="post-metadata">

**Author:** ![waltd](https://discourse.softpress.com/user_avatar/discourse.softpress.com/waltd/32/2720_2.png) [@waltd](https://discourse.softpress.com/u/waltd)\
**Post date:** [November 24, 2012, 5:57pm UTC](https://discourse.softpress.com/t/pro-corners/15711/2 "2012-11-24T17:57:17Z")

</div>

If you’re bending the corners with Freeway’s design interface, then hover over the center-point of the curve with your mouse. You should see a tail-less cursor when you get over the center, and a small circle under it. Click and drag that circle toward where the square corner would be. The radius will change until it becomes 0, and the corner is sharp. The corner dimension in the Inspector will become a dash, meaning multiple values.

Walter

On Nov 24, 2012, at 12:44 PM, Steve Ainsworth wrote:

> Hi All,
> 
> Probably a very simple question and sorry for not trying hard enough… but
> 
> - I have a box and only want the top left and right to have bendy corners - how?
> 
> I know how to make the whole box have bendy corners, but not just certain edges.  
> (via - inspector - Graphic item - shape - corner 0-9px)
> 
> Many thanks  
> Steve
> 
> * * *
> 
> freewaytalk mailing list  
> email@hidden  
> Update your subscriptions at:  
> [http://freewaytalk.net/person/options](http://freewaytalk.net/person/options)

* * *

freewaytalk mailing list  
email@hidden  
Update your subscriptions at:  
[http://freewaytalk.net/person/options](http://freewaytalk.net/person/options)

---

<div class="post-metadata">

**Author:** ![Steve\_Ainsworth](https://discourse.softpress.com/letter_avatar_proxy/v4/letter/s/3be4f8/32.png) [@Steve\_Ainsworth](https://discourse.softpress.com/u/Steve_Ainsworth)\
**Post date:** [November 24, 2012, 6:23pm UTC](https://discourse.softpress.com/t/pro-corners/15711/3 "2012-11-24T18:23:54Z")

</div>

cheers Walter, i knew it was simple and had done it before… but forgot.

* * *

freewaytalk mailing list  
email@hidden  
Update your subscriptions at:  
[http://freewaytalk.net/person/options](http://freewaytalk.net/person/options)