Hi folks,
Something (one of very few!) which annoys me a bit is the ‘Rounded
Rectangle’ tool. What I’d really like it to do, is allow me to set a
specific radius for the corners, rather than some arbitrary ‘small to
large’ slider, which then causes the radius to scale with the side
length.
Cheers,
Phil
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
Agreed. I miss the ability to do this, ala ClarisDraw.
My drawings are limited because of this - I get by
but it’s definitely a detriment, at least for me.
If it weren’t for the ability to import ClarisDraw documents
as a library of sorts I’d have no decent radius corners at all
and Intaglio would be of no use to me.
Best,
Randy
on 6/26/08 8:36 AM, Phil Hendry at email@hidden wrote:
Hi folks,
Something (one of very few!) which annoys me a bit is the ‘Rounded
Rectangle’ tool. What I’d really like it to do, is allow me to set a
specific radius for the corners, rather than some arbitrary ‘small to
large’ slider, which then causes the radius to scale with the side
length.Cheers,
Phil
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
I agree too.
There is a workaround, but it is not simple : with the mouse and the
alt key it is possible to edit the corners
jacques
Le 26 juin 08 à 19:35, RB a écrit :
Agreed. I miss the ability to do this, ala ClarisDraw.
My drawings are limited because of this - I get by
but it’s definitely a detriment, at least for me.If it weren’t for the ability to import ClarisDraw documents
as a library of sorts I’d have no decent radius corners at all
and Intaglio would be of no use to me.Best,
Randy
on 6/26/08 8:36 AM, Phil Hendry at email@hidden
wrote:Hi folks,
Something (one of very few!) which annoys me a bit is the ‘Rounded
Rectangle’ tool. What I’d really like it to do, is allow me to set a
specific radius for the corners, rather than some arbitrary ‘small to
large’ slider, which then causes the radius to scale with the side
length.Cheers,
Phil
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
why not a special handle to edit the corners, as in RagTime ?
jacques
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
Marvellous !
when I draw a rectangle with rounded corners in RagTime, and drag and
drop it into Intaglio, I obtain the same rectanle as Bézier curve (!)
which can be edited ; try the same procedure from another software.
jacques
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
Ragtime- Jezzz !
You mean it has survived 24 years in the Mac environment. I remember when Ragtime first came out way back in the early 80’s. i remember dad gave me a copy and I used it all the time.
The mac community never cease’s to amaze me!
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
RagTime 6 for MacOS X AND for Windows ! With AppleScript integrated,
like Intaglio !
jacques
Le 26 juin 08 à 21:44, John Esser a écrit :
You mean it has survived 24 years in the Mac environment.
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
Le 26 juin 08 à 15:36, Phil Hendry a écrit :
Hi folks,
Something (one of very few!) which annoys me a bit is the ‘Rounded
Rectangle’ tool. What I’d really like it to do, is allow me to set a
specific radius for the corners, rather than some arbitrary ‘small to
large’ slider, which then causes the radius to scale with the side
length.
you can preset the radius of the corners when you doubleclick on the roundedrectangle’ tool, but unfortunately when the rectangle has been drawn no change is possible any more (or I have not found !)
jacques
Yeah! lets all jump up and down with joy, until we see that price tag
of $650!! O_O
(Makes Intaglio look like a bit of a bargain eh?)
;¬)
On 27 Jun 2008, at 05:31, Jacques Villars wrote:
RagTime 6 for MacOS X AND for Windows ! With AppleScript integrated,
like Intaglio !
jacques
Le 26 juin 08 à 21:44, John Esser a écrit :You mean it has survived 24 years in the Mac environment.
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
Not really, at least in 2.9.7.
You can change and preset the radius, but not with any precision.
That is the concern voiced by Phil, and seconded by myself.
Editing the radius corner of an existing round rectangle is another
concern, hopefully addressed if and when the primary concern here
is addressed.
Randy
on 6/27/08 8:36 AM, Jacques Villars at email@hidden wrote:
Le 26 juin 08 à 15:36, Phil Hendry a écrit :
Hi folks,
Something (one of very few!) which annoys me a bit is the ‘Rounded
Rectangle’ tool. What I’d really like it to do, is allow me to set a
specific radius for the corners, rather than some arbitrary ‘small to
large’ slider, which then causes the radius to scale with the side
length.you can preset the radius of the corners when you doubleclick on the roundedrectangle’ tool, but unfortunately when the rectangle has been drawn no change is possible any more (or I have not found !)
jacques
_______________________________________________
Intaglio mailing list
email@hidden
Update your subscriptions at:
[http://freewaytalk.net/person/options](http://freewaytalk.net/person/options)
Hi:
Thanks for your attention, but I do not understand what you are talking about.
I want to use Apple Works to set up simple ads with a headline, a price or offer at a restaurant or tanning salon, some contact data. Maybe scan in a photor or a clipping from the donor’s own advertising scrapbook. I am told you can do this in Apple Works, that Illustrator will be too burdonsome for me.
I can’t get the Help menu to relate to the terms I am using, like display ad or layout. What do you suggest I do to get started?
thanks
— On Thu, 6/26/08, Jacques Villars email@hidden wrote:
From: Jacques Villars email@hidden
Subject: Re: Rounded Corner
To: email@hidden
Date: Thursday, June 26, 2008, 3:22 PM
why not a special handle to edit the corners, as in RagTime
?
jacques
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
Hi:
Thanks for your attention, but I do not understand what you are talking about.
I want to use Apple Works to set up simple ads with a headline, a price or offer at a restaurant or tanning salon, some contact data. Maybe scan in a photor or a clipping from the donor’s own advertising scrapbook. I am told you can do this in Apple Works, that Illustrator will be too burdonsome for me.
I can’t get the Help menu to relate to the terms I am using, like display ad or layout. What do you suggest I do to get started?
thanks
— On Thu, 6/26/08, Jacques Villars email@hidden wrote:
From: Jacques Villars email@hidden
Subject: Re: Rounded Corner
To: email@hidden
Date: Thursday, June 26, 2008, 3:22 PM
why not a special handle to edit the corners, as in RagTime
?
jacques
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
I recognize the need to adjust the radius of round rectangles. Once its drawn a round rectangle is just a path containing four arcs, so what is really needed is a way to adjust the radius and center point of the arcs in a path simultaneously. That’s something I’m investigating for a future version.
The current round rectangle tool actually scales the corner arcs as you adjust the aspect ratio of the rectangle. For example, a short and wide rectangle will have corners that are elliptical arcs whose x axis radius is larger than the y axis radius. I suppose it would be useful to be able to define a fixed corner radius and always get round (rather than elliptical corners). The main issue with this is that it would impose a minimum rectangle size when you’re drawing it, but this shouldn’t be a major problem.
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options
I can’t get the Help menu to relate to the terms I am using, like display ad or layout. What do you suggest I do to get started?
The most simple thing would probably be to play with the sample drawings. Set up text blocks to represent your headline and copy and play with other the other graphics for your images.
Intaglio mailing list
email@hidden
Update your subscriptions at:
http://freewaytalk.net/person/options