On 4 Oct 2017, 9:18 am, Iain Mackenzie wrote:
On 4 Oct 2017, 8:58 am, Gordon Low wrote:
I agree that going down the Affinity route in the future is most likely the best option as I’m not prepared to ‘rent’ software.
Yep, I uninstalled all CS products about 18 months ago in favour of Affinity products, and have never regretted it for 1 second!
Same here. Perfect.
freewaytalk mailing list
email@hidden
Update your subscriptions at:
https://freewaytalk.softpress.com/person/options
I have a late 2013 iMac and have installed High Sierra on an external drive so I can test Freeway 7.1.4 without disturbing my current set up.
I have found a number of similar events to others. When I want to import a picture into a graphic the initial window is there for doing so.
( I cannot put a screenshot on as I don’t know how to here!). If I select the picture I want to include the bottom part of the panel disappears, as with other users, but the ‘open’ button is still there and I can click on that and the picture appears in the graphic position I have selected.
When I did a preview the picture was there as expected. As this was in effect a new installation I then published the site. I then got a panel saying certain parts of ‘sequence timer’ panels were missing. I opened up the site in Firefox and found that none of my sequence timer/show hide layers worked any more. Also a large number of older galleries where I had used Showcase didn’t work anymore.
From this I assumed I wouldn’t be able to use Freeway in High Sierra.
Today I have applied the High Sierra incremental update and then opened Freeway to see if it made any difference. I found the bottom of the panel is still missing but again I can add the imports. I also found that I didn’t get any message when publishing the site and all my sequence timers and old Showcase galleries now work. I will not put HS on my main hard drive yet but the update does appear to have repaired the faults I was experiencing. Hopefully I will find no others. Has anyone else installed the update and found it improved the situation?
freewaytalk mailing list
email@hidden
Update your subscriptions at:
I applied the update, but it hasn’t improved the import dialog problem, which if you want to import pass-through images (for responsive work) is necessary as the check boxes vanish!
freewaytalk mailing list
email@hidden
Update your subscriptions at:
Hi Paul,
Thanks for your feedback. One way around this is to import the graphic into an HTML box - in which case it will default to being pass-through.
Jeremy
–
On 13 Oct 2017, at 12:37, Paul email@hidden wrote:
I applied the update, but it hasn’t improved the import dialog problem, which if you want to import pass-through images (for responsive work) is necessary as the check boxes vanish!
freewaytalk mailing list
email@hidden
Update your subscriptions at:
https://freewaytalk.softpress.com/person/options
Sadly not fixed here with 10.13.1.
freewaytalk mailing list
email@hidden
Update your subscriptions at:
There will be good news in the future. Can’t say any more because of NDA.
freewaytalk mailing list
email@hidden
Update your subscriptions at:
hey all… just to add to the Sierra discussion…
I have MacBook Pro / touch bar with Sierra installed…and not one problem here on the FW build.
I am postponing upgrading to High Sierra until Im sure FW is in working order…
freewaytalk mailing list
email@hidden
Update your subscriptions at:
Carla, you can always use Sierra in a VM within High Sierra - like I and others do - as a temporary solution.
freewaytalk mailing list
email@hidden
Update your subscriptions at:
Thx Lain
Im not working with a VM, but I think Im ok for now… hopefully FW will be roaring back soon.x
freewaytalk mailing list
email@hidden
Update your subscriptions at:
On 9 Oct 2017, 2:22 pm, sonjanna wrote:
Hi there,
can someone tell me perhaps if in earlier versions of FW (5 +6) the import function is broken too in High Sierra? I still have a few old websites of clients who never liked to change/upgrade to 7. Most of these websites are in FW 6. Little changes are still possible in Sierra without any problems.
Same here, a few old sites that are still updated under FW 5 & 6. Sadly, the issue remains under High Sierra 10.13.1 for FW 5, 6, and 7. Fortunately for me, those older sites don’t usually get more than a few tweaks so I probably won’t run into this issue with them.
freewaytalk mailing list
email@hidden
Update your subscriptions at:
https://freewaytalk.softpress.com/person/options
Sadly, no fix in the release build of 10.13.2 either.
freewaytalk mailing list
email@hidden
Update your subscriptions at:
On 6 Dec 2017, 7:46 pm, Iain Mackenzie wrote:
Sadly, no fix in the release build of 10.13.2 either.
Yeah, I just upgraded my iMac to 10.13(.1) and 10.13.2 was available just after I rebooted. But the fix wasn’t there. I sure hope Apple does ship one, though.
freewaytalk mailing list
email@hidden
Update your subscriptions at:
https://freewaytalk.softpress.com/person/options
On 6 Dec 2017, 7:46 pm, Iain Mackenzie wrote:
Sadly, no fix in the release build of 10.13.2 either.
That is sad after your earlier hint.
Can someone remind me: the main problem is that some people who are using 10.13 find that the pass-through checkbox is disabled in the Import dialog?
I think there are two ways around this:
Import graphics into an HTML box (with a green or blue outline) rather than a graphic box (with a grey outline). If you do this, the graphics will default to being pass-through.
Hold down the Option key while dragging a graphic into a box (it will default to being pass-through)
Jeremy
freewaytalk mailing list
email@hidden
Update your subscriptions at:
https://freewaytalk.softpress.com/person/options
On 8 Dec 2017, 8:45 pm, Jeremy Hughes wrote:
That is sad after your earlier hint.
Can someone remind me: the main problem is that some people who are using 10.13 find that the pass-through checkbox is disabled in the Import dialog?
I’m still hopeful!
The problem is that all import options are gone from the dialogue box. There is just an empty grey box where the options should be.
Is it possible to post images here?
freewaytalk mailing list
email@hidden
Update your subscriptions at:
https://freewaytalk.softpress.com/person/options
Hi Iain,
On 8 Dec 2017, at 20:54, Iain Mackenzie email@hidden wrote:
On 8 Dec 2017, 8:45 pm, Jeremy Hughes wrote:
That is sad after your earlier hint.
Can someone remind me: the main problem is that some people who are using 10.13 find that the pass-through checkbox is disabled in the Import dialog?
I’m still hopeful!
The problem is that all import options are gone from the dialogue box. There is just an empty grey box where the options should be.
Is it possible to post images here?
I can see an image the Gordon Low posted on 28th September.
I think there are workaround for the other options as well. Except Show, probably.
Jeremy
freewaytalk mailing list
email@hidden
Update your subscriptions at:
https://freewaytalk.softpress.com/person/options
How can we post images here?
freewaytalk mailing list
email@hidden
Update your subscriptions at:
On 8 Dec 2017, at 21:26, Iain Mackenzie email@hidden wrote:
How can we post images here?
I think you post a link, embedded in
Jeremy
freewaytalk mailing list
email@hidden
Update your subscriptions at:
https://freewaytalk.softpress.com/person/options
On 8 Dec 2017, at 21:26, Iain Mackenzie wrote:
How can we post images here?
I think you post a link, embedded in
Jeremy
freewaytalk mailing list
email@hidden
Update your subscriptions at:
https://freewaytalk.softpress.com/person/options
Sorry - not having much success with the web interface.
The link is introduced with ! followed by [screenshot] followed by (IMAGELINK)
Jeremy
freewaytalk mailing list
email@hidden
Update your subscriptions at:
Upload the image anywhere public, and link to it. You could make a scratch page in a Freeway document, and not link it to any of the pages in your site, then just drag the picture there and upload your site. To post a real image link here, you use Markdown syntax, which looks like this:
Walter
On Dec 8, 2017, at 4:26 PM, Iain Mackenzie email@hidden wrote:
How can we post images here?
freewaytalk mailing list
email@hidden
Update your subscriptions at:
Information for existing FreewayTalk / Groups.io users - Site Feedback - Softpress Talk
freewaytalk mailing list
email@hidden
Update your subscriptions at:
https://freewaytalk.softpress.com/person/options
